Showing 1–9 of 36 results
-
6% OFF
1.5KW COMPLETE INVERTER SYSTEM
A 1.5kW system is designed for low-to-medium consumption. It is not meant for heavy heating appliances like electric kettles, irons, or water heaters.
Here is a breakdown of what typically comes in this package and what it can actually d0.
Device Type Example Load Estimated Run Time (on 200Ah battery) Lighting 10 LED Bulbs (10W each) 10 Hours Entertainment 42″ LED TV + Decoder 6 Hours Computing 2 Laptops 4Hours Appliances Small Energy-Efficient Fridge 5 Hours Cooling 2 Standing Fans 6 Hours
📄 Technical Specifications:
1.5kW Hybrid Inverter
1. Output (AC)
Feature Specification Rated Power 1,500W (1.5kW) Surge / Peak Power 3,000W (usually for 2–5 seconds) Output Voltage 230V AC (±5%) Frequency 50Hz / 60Hz (Auto-sensing) Waveform Pure Sine Wave (Safe for electronics) Transfer Time 10ms (for Computers) / 20ms (Appliances) Peak Efficiency 90% – 93%
📄 Technical Datasheet:
2.56kWh LiFePO4 Hybrid Battery
1. Electrical Specifications
Feature Specification Nominal Energy 2.56 kWh (2560 Wh) Nominal Voltage 25.6V Nominal Capacity 100 Ah Standard Charge Current 50A (Recommended) Max Continuous Charge Current 100A Max Continuous Discharge 100A Peak Discharge (3–5 sec) 150A – 200A Voltage Window 20.0V – 29.2V 2. Lifespan & Performance
Feature Specification Cycle Life >6,000 Cycles (@ 80% Depth of Discharge) Design Life 10+ Years Depth of Discharge (DoD) 90% – 95% (Safe usable energy) Self-Discharge < 3% per month BMS Protections Overcharge, Over-discharge, Over-current, Short-circuit, Temperature UGX4,200,000.00Original price was: UGX4,200,000.00.UGX3,930,000.00Current price is: UGX3,930,000.00. -
0% OFF
1.5KW COMPLETE SOLAR SYSTEM
UGX5,100,000.00Original price was: UGX5,100,000.00.UGX5,060,000.00Current price is: UGX5,060,000.00. -
1.5KW/12V SINGLE PHASE SOLAR INVERTER
UGX983,000.00SRNE 1.5kW 12V Single phase Solar Inverter (HF1215S60-108)
The HF1215S60-108 is a high-performance, an all in one power solution. It combines a Pure Sine Wave inverter, a high-voltage MPPT solar controller, and a smart battery charger into a single, compact unit optimized for 12V architectures.
Technical SpecificationsÂ
-
Model: SRNE HF1215S60-108 (High-Frequency Hybrid)
-
Output Power: 1,500W Continuous / 3,000VA Peak Surge (200%).
-
Solar Capacity: Massive 1,000W Max PV Input on a 12V architecture.
-
High-Voltage PV: 180V DC (Max Voc) allows series-wired panels to reduce cable costs and line losses.
-
Smart MPPT: Inbuilt tracking range of 15V – 90V DC for up to 30% higher efficiency.
-
Dual Charging: Combined 60A Solar and 40A AC Utility charging capability.
-
Pure Sine Wave: Grid-quality power ($<3\%$ THD) safe for all sensitive electronics.
-
UPS Function: Ultra-fast 10ms transfer time prevents PC/Router reboots during outages.
-
Battery Support: User-definable settings for LiFePO4, Gel, AGM, and Flooded types.
-
Protection: Hardware-level safety for PV reverse polarity, short-circuit, and over-current.
-
Warranty: 2-Year comprehensive manufacturer guarantee.
Ideal Applications
-
Home Essentials: Perfect for powering a fridge, LED lighting, Wi-Fi, and entertainment systems.
-
Home Office: Reliable backup for PCs, printers, and networking equipment.
-
Mobile Power: The ultimate choice for luxury caravans, motorhomes, and remote off-grid cabins.
Power your off-grid solar system with the SRNE 1.5KVA 1500W 12V Hybrid Solar Inverter, a high-performance, pure sine wave inverter designed for reliability, efficiency, and seamless integration with solar storage batteries.
-
-
10KW/48V SINGLE PHASE,THREE PHASE INVERTER (PARALLEL)
UGX4,680,000.00SRNE 10kW 48V Hybrid Solar Inverter (ASP48100S200-H)
The SRNE 10kW 48V is a high-performance hybrid power hub designed for large residential estates and commercial operations. Delivering 10,000W of continuous power and a massive 20,000VA surge, it is engineered to handle heavy industrial loads, high-torque motors, and sensitive IT infrastructure with ease.
Key Features and Benefits
10KW Continuous Power Output
- Delivers 20KVA peak output for powering multiple appliances, equipment, and large household systems.
- Supports 6HP motor loads, ideal for water pumps, fridges, and compressors.
Advanced 200A MPPT Charging with Dual Inputs
- Two independent MPPT inputs, each accepting up to 5.5KW solar power.
- Open circuit voltage up to 500Vdc per input, allowing for more solar panel flexibility.
- MPPT efficiency at 99.9%, delivering maximum energy harvesting from your solar array.
Powerful Hybrid Charging
- Accepts solar + grid/generator input simultaneously for hybrid charging.
- 200A max hybrid charging current charges batteries faster and more efficiently.
- Works with 48V battery systems, including Li-ion, Lead-Acid, and user-defined types.
Battery-Free Operation and Fast Switching
- Can power loads without batteries (UPS mode).
- 10ms automatic switch between power sources ensures uninterrupted electricity.
Parallel Scalability
- Connect up to 6 inverters in parallel, forming up to 60KW total system capacity.
- Supports three-phase output when three or more units are connected.
Protection and Control
- Built-in protections:Â over-voltage, under-voltage, overload, reverse current, and over-temperature.
- Communication via RS485, CAN, USB, and optional Wi-Fi/GPRS for remote monitoring.
- Industrial-grade enclosure with IP20 indoor protection, quiet fan cooling, and compact design.
Ideal Applications
- Large residential solar systems
- Commercial and office backup setups
- Solar water pumping and farm installations
- Remote or off-grid areas needing scalable energy solutions
- Businesses seeking uninterrupted power with generator integration
Technical Summary
- Model:Â ASP48100S200-H
- Output Power:Â 10,000W (20,000VA max)
- Battery Voltage:Â 48V
- Hybrid Charging Current:Â 200A
- MPPT Inputs:Â Dual 5.5KW (500Vdc per string)
- MPPT Voltage Range: 125–425V
- Efficiency:Â 92% (99.9% MPPT tracking)
- Switch Time:Â 10ms
- Protection Rating:Â IP20
- Warranty: 2 Years
-
12KW/48V SINGLE PHASE,THREE PHASE INVERTER ( PARALLEL)
UGX5,242,000.00SRNE 12kW 48V Hybrid Solar Inverter (ASP48120S200-H)
The SRNE 12kW 48V is the definitive high-capacity solution for large-scale energy demands. Delivering a massive 12,000W continuous output and a 24,000VA peak surge, this powerhouse is engineered to manage the heaviest industrial, commercial, and luxury residential loads with ease.
Featuring an industry-leading Dual-MPPT architecture and a high-voltage 800V DC PV Input (model dependent), it maximizes energy harvesting while drastically lowering installation costs. Whether configured for high-capacity single-phase power or a professional Three-Phase industrial grid, this 12kW unit offers the ultimate in reliability, scalability, and performance.
Key Applications:Â
-
Commercial & IT Infrastructure: Provides UPS-grade protection with a 10ms transfer time for server rooms, data centers, and large-scale office blocks.
-
Industrial Machinery: The massive 24,000VA surge capacity easily starts high-torque 6HP to 10HP motors, lathes, and heavy-duty air compressors.
-
Agricultural & Water Systems: Ideal for powering large borehole pumps, industrial irrigation systems, and climate-controlled greenhouses.
-
Luxury Residential Estates: Designed for high-demand homes to run multiple 32,000 BTU Air Conditioners, electric geysers, and EV Fast-Chargers simultaneously.
-
Medical & Laboratory Facilities: Delivers ultra-stable, clean power ($<3\%$ THD) for sensitive MRI, X-ray, and surgical equipment where power failure is not an option.
-
Cold Storage & Food Processing: Ensures 24/7 uninterrupted energy for large walk-in freezers and industrial-scale food processing lines.
-
Scalable Mini-Grids: Supports Parallel Synchronization of up to 6 units, allowing for the creation of massive 72kW Single-Phase or Industrial Three-Phase (415V) power plants.
-
High-End Kitchens: Easily manages the high-draw demands of induction cooktops, dual electric ovens, and industrial dishwashers running at once.
General Specs:
- Rated Output Power: 12,000W / 12,000VA
- Nominal Battery Voltage: 48V
- Max. PV Input Power: 6600W +6600W
- Max. PV Input Voltage: 500V + 500V
- MPPT Voltage Range: 125V–425V
- No. of MPPTs / Strings per MPPT: 2 / 1
AC Output (Off-Grid):
- Nominal Output Voltage: 230/400V AC (3-phase)
- Frequency Range: 50Hz / 60Hz
- Output Waveform: Pure Sine Wave
- Output Mode: Off-grid (default) / Load Power Without Battery
- Switch Time: 10ms (typical)
- Motor Load Capacity: 6HP
Battery and Charger:
- Battery Type: Li-ion / Lead-acid / User-defined
- Battery Voltage Range: 40–60V
- Max. Solar Charging Current: 260A
- Max. Grid/Generator Charging Current: 120A
- Max. Hybrid Charging Current: 260A
Efficiency:
- MPPT Tracking Efficiency: 99.9%
- Max. Efficiency: 92%
- European Efficiency: 97.5%
Protection & Features:
- IP Protection Rating: IP20 (Indoor only)
- Cooling Method: Air cooling
- Protection Functions: PV input overvoltage, input current limiting, night reverse current, AC over/undervoltage, battery over/undervoltage, battery overcurrent, short-circuit, overload, heat sink over-temperature
- Communication Ports: RS485, CAN, USB, Dry Contact
- External Modules (Optional): Wi-Fi / GPRS
- Topology: Transformerless
- Certifications: IEC62109-1/2, UL1741, RoHS, EN61000-6-1/3, FCC 15 Class B
- Mechanical:
- Dimensions (H x W x D): 620 × 445 × 130 mm
- Net Weight: 27 kg
- Environmental:
- Operating Temperature: -10°C to +55°C (derate >45°C)
- Humidity: <100% (non-condensing)
- Noise Level: <60dB
- Installation: Indoor only
-
-
12V/24V MPPT SOLAR CONTROLLER 20A
UGX180,000.00The SRNE Shiner-2420 MPPT Solar Charge Controller (20A) is a high-efficiency solar charge & discharge controller designed for 12V/24V solar systems. With advanced MPPT technology, it optimizes solar panel performance, increases charging efficiency, and ensures safe battery management.
 20A MPPT Controller |  Auto 12V/24V Detection | 3-Years Warranty -
12V/24V MPPT SOLAR CONTROLLER 30A ( SHINER 2430)
UGX258,000.00SRNEÂ 30AMPPT Solar Charge Controller (12V/24V )
The SRNE Shiner 12V/24V 30A MPPT Solar Charge Controller is a high-efficiency charge & discharge controller for 12V/24V solar systems. With advanced MPPT tracking technology, it increases charging efficiency by up to 30%, ensuring maximum power output from your solar panels. Perfect for home, office, and off-grid solar setups.
 30A MPPT Controller |  Auto 12V/24V |  100V Max Input |  3-Year Warranty -
20KW/48V THREE PHASE SOLAR INVERTER 230/400VAC
SRNE 20kW 48V Three-Phase Hybrid Inverter (ASP48200SH3)
The Industrial Powerhouse: Massive 48V High-Density Solution
The SRNE 20kW 48V is a high-density, three-phase energy hub engineered for the most demanding commercial and industrial environments. Delivering a massive 20,000W continuous output and a 40,000VA surge, it provides the raw power needed for 10HP motors, large HVAC systems, and entire production lines. Featuring 100% Three-Phase Unbalanced Support, it maintains rock-solid stability even when electrical loads are unevenly distributed across your facility.
Core Technical Specs:
-
-
Rated AC Output: 20,000W (20kW) Continuous.
-
Peak Surge Power: 40,000VA (200% surge for 5 seconds).
-
Output Voltage: True Three-Phase 230V (L-N) / 400Vac (L-L).
-
Phase Management: 100% Unbalanced Load Support (handles full load on one phase without tripping).
-
System DC Voltage: 48V (Nominal 51.2V) — compatible with all major LiFePO4 brands.
-
Max PV Input Power: 30,000W (30kWp) total solar capacity.
-
MPPT Architecture: Dual or Triple independent trackers (model dependent).
-
Max PV Voltage (Voc): 800V – 1,000V DC (supports long-string efficiency).
-
Hybrid Charging: Combined 260A Max Charge (Solar + Grid/Generator).
-
Transfer Speed: <10ms UPS-grade switching for mission-critical IT/Medical loads.
-
Scalability: Parallel synchronization for up to 6 units (120kW total grid).
-
Power Quality: Pure Sine Wave with Total Harmonic Distortion (THD) <3%.
-
Protection Rating: IP20 / IP65 variants available for industrial environments.
-
Warranty: 2-Year Comprehensive Industrial Warranty.
-
Best For:
-
Industrial Factories: High-torque machinery and CNC centers.
-
Commercial Hubs: Shopping centers, office blocks, and server farms.
-
Agriculture: Industrial borehole pumps and cold-storage silos.
-
Healthcare: Reliable, clean power for MRI and life-support systems.
Â
-
-
3.3KW/24V SINGLE PHASE SOLAR INVERTER
UGX1,436,000.00SRNE 3.3kW 24V Single Phase Hybrid Solar Inverter (HF2430S80-H)
The SRNE 3.3kW 24V is a professional-grade hybrid inverter designed for high-demand residential backup and off-grid efficiency. Featuring a massive 4,000W Solar Capacity and an industry-leading 500V DC High-Voltage PV Input, this unit allows for longer solar strings, significantly reducing installation complexity and cabling costs.
With a 3,300W Pure Sine Wave output and a lightning-fast 10ms UPS transfer time, it provides seamless, grid-quality power for sensitive electronics, larger household appliances, and home offices. Robust, high-capacity, and backed by a 2-year comprehensive warranty.
Quick Technical Highlights:
-
Power Output: 3,300W Continuous / 6,600VA Peak Surge.
-
Solar Input: 4,000W Max PV Array Power.
-
High-Voltage MPPT: 500V Max Voc (120V – 450V Tracking Range).
-
Charging Power: 80A Solar / 60A AC Utility Charging.
-
Compatibility: Optimized for LiFePO4 (Lithium), Gel, AGM, and Flooded batteries.
-
Reliability: Pure Sine Wave ($<3\%$ THD) with full industrial safety protection.
What It Can Run:
Designed to power a medium-to-large household or a professional office, this unit handles high-surge inductive loads and sensitive electronics simultaneously:
-
Large Appliances: Double-door refrigerators, deep freezers, and washing machines.
-
High-Surge Loads: 1.5HP Air Conditioners (Inverter type) and 1HP Water Pumps.
-
Home Office: Multiple Laptops, Desktop PCs, Laser Printers, and Servers.
-
Entertainment: 75″ LED TVs, Home Theater Systems, and Gaming Consoles.
-
Kitchen Essentials: Microwave ovens, blenders, and coffee machines.
-